CLEANING VS. DISINFECTING
First, it’s important to clarify cleaning vs. disinfecting. Here’s how the Centers for Disease Control and Prevention (CDC) differentiate these processes:
Cleaning requires water and either soap or detergent to remove dirt, spots and stains. Just cleaning a surface won’t kill viruses, bacteria or fungi. Instead, it can remove germs from surfaces and lower the risk of spreading.
Disinfecting uses chemicals to kill germs. It won’t necessarily remove spots and impurities, but it is the best way to remove contamination. In order for this process to work, you will need to clean a surface before applying disinfecting spray. The EPA has an extensive list of registered disinfectants that are effective against viruses like COVID-19.
There’s also sanitizing, which lowers the number of germs to a safe level determined by public health standards. Sanitizing is the most common practice for surfaces that come in contact with food. This process can be done without using chemicals, like with a steam cleaner.
HOW TO DISINFECT AN ELEVATOR
Here’s a look at cleaning and disinfecting processes by the type of surface. When cleaning and disinfecting and while the elevator is drying, you may want to temporarily shut it down to avoid foot traffic.
Hard/Non-Porous Surfaces – Wall Panels, Doors, Handrails
- Before disinfecting, use soap and water to remove dirt and grime. Use cleaning solvents per the manufacturer’s recommendation and consult your elevator service provider to be sure the products are safe to use — this is especially important for electrical areas.
- Never pour water on any electrical areas. Instead, use a damp paper towel or cloth.
- Use a disposable paper towel or a microfiber cloth, and an EPA-registered disinfectant. Opt for a non-abrasive, non-corrosive solution that is compatible with the surface material.
Floors
- Sweep or vacuum the floor or carpet. Carpets can trap dust, germs and dirt, so it’s important to vacuum even if it looks clean.
- To deep clean a carpet, use a steam cleaner or an appropriate EPA-registered solution. Non-carpeted flooring can be disinfected with a non-abrasive, non-corrosive solution.
Soft/Porous Items –Rugs, Pads, Mats
- Clean the items first by removing noticeable debris. You can do this by sweeping or vacuuming.
- If possible, wash the items in the laundry on the warmest setting.
- If you can’t throw an item in the laundry, clean it with soap and water and a cloth. After cleaning, use an appropriate disinfecting solution.
Non-Chemical Disinfectant Options
Chemicals aren’t the only way to disinfect. Purifying and disinfecting products, like the CASPR 200, are designed specifically to kill bacteria, viruses and other germs found in elevators. These small systems are installed in the elevator cab and eliminate air pollution, including illness-causing pathogens.
HOW TO PROTECT YOURSELF WHILE CLEANING & DISINFECTING
The safety of you and your passengers is the most important part of the elevator cleaning and disinfecting process. Here are a few helpful tips:
- If necessary, shut down the elevator when you’re cleaning. This will help you avoid interruptions and unnecessary contamination.
- Wear disposable gloves and a gown to protect your skin and clothing.
- Wash your hands in between elevator cleanings.
- Avoid touching your face while cleaning. You don’t want chemicals or germs getting on your skin or in your eyes.
HOW OFTEN YOU SHOULD CLEAN & DISINFECT YOUR ELEVATORS
The frequency will depend on the type of building. If you have dozens of elevators located in a busy, high-traffic office building, you may want to clean and disinfect them on a daily basis. But if you have a single elevator in a small apartment building, a weekly cleaning could suffice.
Medical facilities should obviously take a different approach. Since sick people are constantly coming in and out, elevators in high-traffic areas (like lobbies and emergency areas) should be continuously disinfected throughout the day.
Also consider the season and climate. Your elevators may need more attention during flu season or if another illness is spreading throughout the building. Remember that germs can stick around for longer than we may think. According to the World Health Organization, viruses like COVID-19 can live on surfaces for up to a few hours to several days — the exact time will depend on the type of surface. In this instance, frequent disinfecting is key to prevent the spread of the virus.
ELEVATOR CLEANING & DISINFECTING TIPS
- Always clean surfaces before using disinfecting products.
- Review the elevator manufacturer’s guidelines for cleaning. Some surfaces could become damaged if you use the wrong solution.
- Also check the directions on any cleaning or disinfecting solution you’re using, as some might not work to the best of their ability if used incorrectly. For example, do you know how to properly use Clorox disinfecting wipes? According to the instructions, Clorox says to “wipe surface, using enough wipes for the treated surface to remain visibly wet for four minutes. Let surface dry.”
- It’s important to disinfect surfaces that may not be considered high-touch areas. Germs and bacteria can land anywhere in an elevator — doors, floors, wall panels, etc. To ensure that your elevator is as clean as possible, the entire elevator needs to be disinfected.
- Don’t use sponges when cleaning or disinfecting. They can collect bacteria.
- Never spray chemicals directly on to an elevator surface. Spray the solution on to a fresh paper towel or a clean microfiber cloth and then wipe down the surface. Spraying chemicals directly onto a surface could cause electrical damage.
- Make sure that the products you are using haven’t expired.
- Throw away cleaning gloves, gowns and disposable paper towels immediately after use. Wash reusable cloths right away.
- Never shake out dirty items before cleaning them (rugs, drapes, etc.). This could spread dirt and bacteria throughout the air.
- Consider offering alcohol-based hand sanitizer in common areas of your building to encourage healthy hand hygiene.
SOCIAL DISTANCING IN ELEVATORS
The CDC recommends practicing social distancing of at least 6 feet. But how do you socially distance yourself in an elevator?
As businesses begin to reopen, Bloomberg Law notes that buildings may need to limit the number of people allowed in an elevator, especially since the virus can linger in the air. While this will inevitably result in long lines and late workers, building owners will need to get creative. We’ll likely see freight elevators open for public use and more leniency for late workers. It’s also an opportune time to ensure that your elevators are covered by an elevator maintenance plan, as downtimes are the last thing anyone needs right now.
If you have questions about disinfecting your elevators or would like to learn more about the CASPR 200 disinfecting system, contact our team today.
Eco-friendly elevators?
The first question probably running through your mind is what is an Eco-friendly elevators. Some people refer to them as green elevators. One thing to keep in mind is that energy consumption is key. For Eco-friendly elevators the processes we apply, the machines one needs and the type of technologies that you use are used as determinants when integrating the elevators. Other aspects we consider is the lighting, the type of control panels and the HVAC systems plus flooring and painting. All this contribute to an elevator being Eco-friendly thus becoming very key on its outlook and general operations.
We use inventions such as Machine room less Technology which was initially introduced in the mid-1900s. Miniature versions of the technology have made it convenient to run an elevator incorporating a gear less traction design. Our elevators look to save up to 50% of energy reduction than earlier inventions. Some make use of already used energy by recovering the used energy and putting it back to the electrical system. Looking at the large scale of things, you’d comfortably save a lot of energy in a month alone. They are known as regenerative drive system.
How they work
We use current technologies that make use of double deck elevators. They are called group control systems, mostly used in buildings with high traffic. It moves traffic to one lift at a time and minimize on the number of stops to be made. You’ll find one lift only makes stops to even numbered floors or on odd numbered floors. This makes it possible for us to help ease flow especially in urban areas with high traffic.
There’s also the use of in-cab sensors that allow elevators to go into idle mode. The same way phones would go to sleep mode when they’re not being used. Therefore, when the lights go out, the music stops, video screens are off, the ventilation system slows much of electricity. Even the energy consumption is reduced thus helping cut on costs incurred as well.
Lastly, we have the use of destination dispatch software. It takes elevator stops in batches and then makes all the necessary stops in one trip. Other elevators would make every person going to one floor wait for the next trip. This makes a passenger take longer to get to where they’re going.
The advantage of using eco-friendly elevators is that your buildings will use less water, energy and other materials especially when looking at the long term aspect. In order to meet your needs, we are enhancing our products with the capabilities that will decrease large energy consumption as well as help conserve the environment.
They help improve the building’s efficiency as well as property value. Systems with destination control software would help avail transportation much faster and much more efficient travelling capabilities. This would let the building owners to welcome more tenants with traffic needs.
- Does your elevator or escalator equipment break down frequently?
- Has the County Inspector identified that the equipment is not up to code?
- Do you get complaints about old décor, or are you looking to update your décor?
- Are you interested in “Going Green”?
- Do you need an economic solution to the long-term use of your equipment?
If the answer to any of the above questions is yes then your elevator modernization is the answer to your problems and we are the people you need to turn to. Volkslift East Africa offers the following Service Difference in comparison to other lift companies:
- We provide a wide variety of choices in technology and decor. This allows the customers to have a choice in their elevator purchases.
- More so, Incorporation of Eco-sensitive finishing material options to meet “Green” or “LEED” requirements. LEED means (Leadership in Energy and Environmental Design).
- Lastly, installation of systems that are developed with the latest computer and micro processing technology.
No matter what your vertical mobility needs are, we can accommodate your business needs. For elevator lifts and escalators orders and inquiries, send us an email on info@volksliftea.co.ke or call us today on 0716757222